INTERNET CONNECTION SPAIN, Internet Service Provider ISP connection access in Spain INTERNET CONNECTION SPAIN

	Windows XP
	Windows 95/98
	Windows Me
	Windows 2000
	Windows NT
	OS X
	OS 9

This guide will explain you how to install the Internet connection from Gonuts4free.com. Please note that there are different versions of Windows 2000 (Server, Advanced, Profesional, etc...), and that you might have other screens displayed then the ones presented here. You can also use our autoinstallation file for windows 2000, instead of doing it manually.

1. Click on the Windows "Start" button followed by "Settings", "Network and Dial-up Connections", "Make New Connection".

2. A box will appear like the one below. Just click "Next".

3. Make sure that you have a tick in the first option called "Dial-up to private network" and press "Next".

4. A box will appear asking you for the telephone number or local dial up number. Type in "901929200" and press "Next".
The local node 901929200 can be used all over Spain: If you prefer to use a specific node please choose one in the list. Click here to view the list...

5. Another box will appear asking for the availabality, just click "Next".

6. Internet connection sharing? (you can if you want...) Just click "Next".

7. In the name type something easy, like "My spanish connection" or "Gonuts4free", and click "Next". To access your connection quickly, a shortcut would be great. Just make sure you have a tick in the box called "Add a shortcut to my desktop", and press "Finish".

8. Great, now a screen will appear asking you for a username and password, but first let's click on "Properties".

qwerty@free

9. This screen will appear. Click on "Networking" located at the top.

10. In Networking, highlight the Internet Protocol (TCP/IP), and click "Properties".

11. Switch on the option called "Use the following DNS server addresses".
You can use different DNS's , just use the ones as shown, these are updated automatically.
Prefered DNS server: 80.58.0.33
Alternative DNS server: 80.58.32.97
Press "OK" and "OK" again.

12. You will be back to the login screen. Use the username and password as shown below.

qwerty@free

13. Good, now let's try it. Press "Dial". The connection will now start dialing. Normally you should hear a sound beeping unless you have disabled the sound. You can see when you are connected if you have the 2 green monitors flashing at the bottom right hand side of the screen (1), unless you turned this option off.(2)

If you get error messages or other unidentified problems, visit our troubleshooting page or contact us using the support submission form or call our support desk on 807 51 70 45.

(1)

(2)