This guide will explain you how to install the Internet connection from Gonuts4free.com. Please note that there are different versions of Windows Me, and that you might have other screens displayed then the ones presented here.

1. Double click the "My Computer" icon.

2. Double Click on the "Control Panel" icon.

3. Double Click on the "Dial-Up Networking" icon.

4. Double Click on the "Make New Connection" icon.

5. A box will appear asking you to type a name for the connection. Type "Gonuts4free", specify your modem and then click "Next".

It will ask you for a telephone number or local dial up number. Use the following number: "901929200"..
The local node 901929200 can be used all over Spain: If you prefer to use a specific node please choose one in the list. Click here to view the list...

Click "Finish"

6. "Right" click on the "Gonuts4free" icon and then click "Properties" with the "left" button.

7. Remove the tick from "Use area code and Dialing Properties". Then click on the "Networking" tab.

8. Make sure that only "TCP/IP" and "Enable Software Compression" are ticked.

9. Now press the "TCP/IP settings" button. And enable the "Specify name server addresses" box on. Use the following DNS's:
Primary DNS: 80.58.0.33
Secondary DNS: 80.58.32.97
Press "OK".

10. Click on the "Security" tab and type your login information as follows.

qwerty@free

11. Press the "Dialing" tab and Remove the tick from "Disconnect when a connection may no longer be needed". Click "OK" to save the settings.

12. Double click the "Gonuts4free" icon to open the login box.

Good, now let's try it. Press "Connect". The connection will now start dialing. Normally you should hear a sound beeping unless you have disabled the sound.

If you get error messages or other unidentified problems, visit our troubleshooting page or contact us using the support submission form or call our support desk on 807 51 70 45.

© 1998-2008 Gonuts4free.com & Associates.
All rights reserved - Privacy Policy.